Idealistically Caspan

Some Crazy Ideas From Caspan's Head!

Browsing Posts published in October, 2009

Well it’s Monday and I though I would post some more ideas to my Blog. This idea I have made some emails to people inside RIM but heard nothing back so far, Douglas Soltys I’m looking at you!! (BTW I’m poking fun at Douglas he has made a comment that something this big is not easy to distribute and get feedback from internally)  This idea has been born out of the new “distracted driving” law in Canada, Ontario (I’m sure were not the only place that has this law coming into law or already in place). Which basically gives any police officer the right to pull you over and ticket you if they feel like you are being distracted by anything in your car.. Yes this means you smoking guy, holding a Tim Hortons’ cup,  steering with your knee, shaving while talking on your cellphone in the rear view mirror!

I support this new law 100% percent, why? well because we have gotten away with it for such a long time and the excuse was always “well it’s not illegal!” I get it because I am one of those people I use my BlackBerry 100 times a day on the road and I have finally started to cut back my use (I only SMS while driving and email at stop lights) I’m kidding BTW…  The only part I actually don’t not agree with is not in the law itself but in the enforcement, the grey area of what is considered to be “distracted”? So to me this law says even if I am changing the radio station I am considered to be distracted, I don’t know about you but I can never figure out how to change radio stations on my car stereo. I am a tech whiz but when it comes to radios just give me the old tuner knob back… What can we do about that? well nothing I guess we have always been a victim of the system that says we get to tell you what is right and what is wrong and it is at our discretion to enforce it.

I guess when it comes right down to it we believe driving is a right but it truly is a privilege that we have all slacked on the rules. There is no excuse you could ever give if you took a life while driving and using a distracting device. The same as no one could every give you an excuse good enough if someone took the life of one of your family members. Hind sight is 20/20 and only after would you see how stupid or unimportant it was to make that call or send that message. My one rule of thumb that I always use in security, parenting and every day life is “If you ever had to explain what happened to someone else, Wife, Boss, Police, Judge without lying would they understand and think you make the right decisions?” if the answer is no then you are taking a risk and you must be ready to deal with consequences of those risks.

Well enough seriousness.. being a gadget geek and loving to try all the new technology coming out about 2 years ago I decided to buy an after market stereo for my Mazda Protegé 5. I did a lot of hands on research at my local car stereo dealership Autosonics to see all the head units that they had on display and how well they worked with the Bluetooth that was built into the Curve 8310. You would be surprised with the amount of device that say they are Bluetooth compatible but were just painful or impossible to pair. I finally settled on a Pioneer single Din unit. The stereo worked great with my iPod with Bluetooth streaming audio until I started to use it for hands free and I had quite the problems with it. Needless to say Pioneer stepped upto the plate and admited to an issue that could not be changed and replaced my unit with a different model FH-P800BT. The unit resolved my hands free issues and I was happy again and faith was restored in companies that go the distance to help you.

Now! I make some job changes and some device changes over to the Bold. With the new job comes BES and security polices. One of these new polices on my device is that the device must auto lock after 10 minutes. As a security conscious person I agree with this. One downside to this policy is that you are not allowed to make outgoing calls when the device is locked. This options can be changed but most companies would not want to allow unauthorized use of a cell phone that was lost. So here births the problem which is the reason for this episode. When my BlackBerry is locked in my pocket or in its holster I am not allowed to make outgoing calls. So now to use my hands free I need to first retrieve my device and unlock it, then I can make a hands free call. Kind of defeats the purpose of hands free I think!

Okay so what our our options? Turn off security and don’t lock the device? Nope not going to happen! Allow outgoing calls when the device is locked? Well this would work but again not ideal for security. So what are we left with for options? Well nothing really, if you want to be safe you have to sacrifice security and vice versa. The only other option I can think is invent something!! Now we’re talking my language.

The following is how I believe we can solve this issue on all BlackBerry devices currently out. It would require some work by RIM but I’m sure they are up to it.

My idea involves the need for a verbal password to be spoken to use hands free when the device is locked. What would happen is that when a security policy is pushed or a user sets a policy that involves the device to not allowing outgoing calls when locked and the device is set to lock after X minutes and no verbal password is set. The device would warn the user on the save of these setting as follows “Warning you have chosen to not allow outgoing calls when the device is locked. This will prevent the use of hands free devices! Would you like to set a verbal password to still be able to ensure the use of hands free?” to this question the user could respond Yes or No.. we need to give them and option because to be honest not everyone uses hands free non could they care about touching their device while driving.

If the user chose No then the device would operate as it does now. If the user chose yes it would open a very small application that would ask you to please speak a phrase to use hands free while the device is locked. To which the user would say then repeat 2 times to ensure correctness a pass phrase. The device would then store that data that is unique to that user.

When the user goes to use hands free the next time you will hear the familiar female voice but instead of “Say a command” you will be prompted “Please say your hands free pass phrase!” to this the user can just speak their pass phrase they set earlier. This would unlock only the phone functions of the device and next you would hear the “Say a command!” and you can proceed with your hands free call without ever touching the device.

Once the call is finished the device would lock up again as normal. If you require to make another call you would need to speak your pass phrase again. I’m sure if it became a real problem to people that make a lot of calls in the car to unlock outgoing calls for x minutes so this would allow for some grace period of being unlocked.

As you could imagine the security people out their are saying “Well now everyone in the car knows the pass phrase!” To this I would calm the question with the fact that the pass phrase is tied to the voice of the person that set it and even if someone could record it and play it back to trick the device… they can only make phone calls. Yes it sucks but it is a level of defense to stop the other side of the coin which is unsecured full access to placing calls.

Also another option could be the ability to have multiple people be able to store a password should you and your wife use the same phone while on the road.

Sorry I don’t have a video or pictures to show you this one like my other episodes. This is more vapor ware that does not exist yet but would love to see on all RIM devices.

Signature
© Caspan 2010

Again this is another repost of something I posted in other forums some time back in the “RIM should have thought of this first!” series.

This episode has to do with the fact that I am a minimalist. My wallet is a small little box that carries just want I need, I only have 3 keys on my key chain one of those being a USB key.  So when I started my job as an IT administrator and was given my security card. This card was too big to fit in my wallet case and I didn’t feel like putting it on a retractable reel clip (those small little pull strings clips you put ID cards on) or a lanyard. I remember a MOD that I did some time back with another company. They handed out little Key Fobs which was nice but still a little to much for me. I cracked the case on the FOB removed the RFID transmitter and placed it in the recessed area in my watch back. This was great I could just swipe my wrist by the receiver and it worked wonderfully. Of course no two security systems seem to have the same RFID range so I could not just use the existing watch with the new work place.

With that background I started to think how could I incorporate this new card into something. It had to be something that I had with me every day. The only thing I could think of was my BlackBerry Bold. After doing some measurements and tests I determined that it was possible. So I started to build my list of stuff I required

1x Security Card
1x Exacto Knife
1x Spray Glue
1x Piece Of Paper (for spraying on)
1x Bold Battery Door
1x Strip of tape

I first I started off by separating the two layers of the security card. With our cards there is a hard plastic shell and a over lay sticky protective backing. Be careful when separating the layers, sometimes the wire is stuck to the sticky side and you can damage the wires that run to the RFID transmitter. After you have removed the backing you should have something that looks like the image below.

RFID - 1

I then used an exacto knife to slowly seperate the wire from the casing. WARNING!! Be very careful when you get to the top where the RFID chip is. The wires here are very thin and delicate and can break very easy.

RFID - 2

I placed the removed wiring into the back of the Bold battery covery to test placing to make sure it was not causing any issues with clearance. If you are wondering what the washers are for in the picture please refer to Episode 1

RFID - 3

RFID - 4

After i was happy with the location I took the wiring out and placed it upside down on an 8.5 x 11 sheet of paper. I then took my spray glue (this was an extra step I took to secure it you do not have to do this step if you dont want) and sprayed the back of the wiring and RFID Transmiter.

RFID - 5

I then placed the wiring in the back of the Bold battery cover and when it was in the proper place i took a peace of packing tape to protect the RFID and wires.

RFID - 6

I placed the door back on the Bold and tested my RFID

RFID - 7

As you can see with some distance I was still able to use my RFID through the battery cover. Note that I have to face the back of Bold to the pannel to get it to work. The signal just is not strong enough to penetrate the battery cover. I alos have tested to make sure it does not effect the signal strenght of the Bold. I have the engineering screens on my BlackBerry and did some testing witht he signal strength numbers up (there is also a keyboard shortcut to do this ALT+NMLL this is a toggle so doing it again reverts it back) removing and replacing the battery door had zero effect on the numbers. I tested this in many different locations to ensure.

Click here for the Video!

Signature
© Caspan 2010

I though for the first few posts I would post some of my content that I have shared with other forums. one of the series was because of my close ties with work and BlackBerry devices I come up with small little ideas the just seem to help with the everyday use of the device.

For the first episode I decided to showcase my existing idea that was already in use. I was frustrated and broke and wanted an easy solution to just kick snap my phone to the dash of my car for GPS and just close proximity to be used easily while driving. Yes I do know it’s illegal now but thats what stop lights are for right?? It was a very simple design the didn’t take much money or planning to make.

Item Purchased:

1x Satellite Radio Window Mount – $9.99

2x Earth Magnets – $1.50 each

2x Thin Washers – $0.10 each

I took a drill and drilled out holes on the flat face plate of the window mount big enough to place the earth magnets in them. I super glued the magnets in place so they were flush with the surface. I then placed 2 small thin washers in the back of the battery cover. I held them in place with some spray glue.

The movie below hosted on YouTube shows the final product. I have put some non-slip material to finish it off since the video was made.

Click here for the Video!

Signature
© Caspan 2010